Smart EVC’s to support Basic AC to Fast DC Charging

Here we offer a full range of Smart DIN-Rail EV Charging Controllers to support your charger building requirements:

  • 2-Port Smart AC EV Controller
  • 2-Port Smart AC EV Controller with V2G/G2V Support
  • 2-Port Smart DC EV Controller with V2G/G2V Support
    • plus an optional IO Controller for additional Relay and CoolingFan Control

AC Smart EV Controller with G2V/V2G support

The multifunctional EV AC charging station controller has been specially designed for the European market. Using this controller, a complete charging station supporting mode-3 and IEC 15118 charging G2V & V2G with two type- 2 outlets with servo locking and LED signaling can be built.

The EVC can be managed by your cloud back-office software using OCPP 1.5/1.6/2.0 or from our Partner.

Load management for smart grid applications is implemented in the embedded software. A Local Micro Smart Grid function can be set-up adding two extra kWh meters on the mod-bus.

The available power for charging will be calculated real-time on the basis of public grid power and Solar/wind energy power.

This controller can be connected to other AC modules via the CAN bus (slave module) to extend the number of outlets up to 24.

Key Features:

  • CSS or Chademo and  Type 2 IEC 62196-2, supporting mode 3 charging
  • V2G and G2V Support using IEC 15118-2 (optional)
  • Controlling up to 23 slave modules
  • 2 x CAN-bus interface. Up-to 30 nodes for Power modules
  • Built-in GPRS / GSM modem for back-office connection
  • GPS positioning for accurate location on the map
  • CAN bus for master-slave and peripherals
  • kWh Meter – 2 x S0/Modbus/RS485/P1 (configurable)
  • 2 x serial connection – RFID / Barcode reader
  • 2 x mechanical lock output Mennekes/Bals/Scame/Phoenix
  • Option for full-color display with touch screen (via CAN)
  • 2 x RCD trip detect
  • Contactor failure detect
  • 2 x DC contactor switch output
  • 2 x triple LED output
  • Support for LCD Displays
  • OCPP 1.5-2.0 ready
  • Galvanic isolated output voltage and current monitoring
  • Immunity IEC 61000-6.2 Emission IEC 61000-6.3
  • Compatibility: EV-ready / PTB Eichrecht

Part No.:

DLEVC-5.XAC-M3: AC EVC without ISO15118

DLEVC-5.XAC-M4: AC EVC with ISO15118

DLEVC-5.XAC-M4D: Dual AC EVC with ISO15118 (coming soon)

DC Smart EV Controller with G2V/V2G support

The multifunctional EV DC charging station controller has been specially designed for the European market. Using this controller, a complete charging station supporting CCS/Chademo/AC-Type 2 IEC-15118 can be built. A charging station up to 300KW can be built using the multi-power module CAN-bus.

The module can be managed by a Cloud back-office software using OCPP 1.5/1.6/2.0. Load management for smart grid applications is implemented in the embedded software. A Local Micro Smart Grid function can be set-up adding two extra kWh meters on the mod-bus.

The available power for charging is calculated in real-time on the bases of the public grid and/or the Solar/wind energy power.

This controller can be connected to other EVCAC / EVCDC modules by CAN bus (slave module mode) to extend the number of outlets up to 24.

Key Features:

  • V2G and G2V Support using IEC 15118-2 (optional)
  • 2 x connection for servo Mennekes/Bals
  • kWh Meter – 2 x S0/Modbus/RS485/P1 (configurable)
  • Built-in GPRS / GSM modem for back-office connection
  • 2 x mechanical lock output e.g. Mennekes/Bals/Scame/Phoenix
  • GPS positioning for accurate location on the map
  • CAN bus for master-slave and peripherals
  • 2 x RCD trip detect
  • Contactor failure detect
  • 2 x serial connection – RFID / Barcode reader
  • Output Power sensing
  • OCPP 1.5/1.6/2.0 Support
  • Cloud back-office by LMS or by OEM using OCPP
  • Immunity IEC 61000-6.2 Emission IEC 61000-6.3
  • Compatibility: EV-ready / PTB Eichrecht
  • Galvanic isolated output voltage and current monitoring
  • 2 x CAN-bus interface. Up-to 30 nodes for Power modules

Part No.:

DLEVC-5.XDC: DC EVC with ISO15118

IO Controller for the DC Cloud Smart Controller

The DIN-Rail DCC IO Module is required if a large DC Charger is being constructed.

The controller supports the following additional features:

  1. A Power Source to drive additional 12V fans
  2. Control of the DC Relays (these are switched depending on various error states and charging starts)
  3. Emergency Stop
  4. AC input contactors to switch the AC side on or off

Part No.: DLIOMOD

EVC Manager Kit

In order to be able to configure your AC and DC EV Controllers, you will require the EVC Manager Kit.

This is a one-time requirement but will help you be work comfortably and independently.

The kit consists of the following:

  • EVC Manager Software on USB Stick
  • Combo USB to RS232 TTL programming & management cable for all smart EVCs
  • RFID Reader
  • RFID Chip Card
  • LED Display
  • Email and Phone Support

Part No.: DLEVCMAN-1