A world first! Highly efficient and compact

The Deltrix 60KW DC Charging Module Combination has been specifically designed for the construction of highly efficient, and high-availability DC EV Charging Stations.

These modules (AC-DC and DC-DC) finally solve the problem of module burn-outs due to the dusting-up of the components over time in systems with poor air filtering or no air filter maintenance. The electronic components are housed in a sealed chamber and a separate air duct is used for the cooling. This unique construction eliminates this dusting-up problem which guarantees reliability and in turn high-availability of the charger.

The use of a separate air duct for cooling instead of component sealing and water-cooling results in a more maintainable and lighter enclosure.

Additionally, the use of the IBGT technology results in a standby power consumption of around 6W which is well below the industry average of 17W. Currently, most chargers are idle for around 80% of the day and therefore this is a very important factor to consider when calculating the operating costs.

Two modules are available as a kit for the construction of your charger:

  1. 60KW AC to DC Rectifier
  2. 60KW DC to DC Converter

Key Features:

  • AC-DC bidirectional module is compatible of 3P4L and 3P3L input. Compatible for
    global applications
  • AC-DC module with 3 phases 4 leg technology, compatible with a wide output range,
    and the user does not need to add DC-DC booster
  • The DC-DC storage module is compatible 750V and -350V output voltage, which is
    compatible with DC storage and well as a minimal power net requirement. +/-375V
    output has an imbalance control, enable it a direct connection of different loads.
  • High frequency and power frequency carrier in the same design, supporting parallel
    operation
  • Built-in EMS function, high voltage box, and soft start function, high system
    integrated design with double 32-bit digital control and ARM.
  • Supports off-grid operation
  • Separate air duct for cooling which eliminates the “dusting-up” of the components over time
  • Very High Efficiency >98.2%
  • Low Standby Power Consumption ≤6W
  • Compact size
  • Ultra-High Power Density
  • Wide Range of Output Voltages
  • Supports CAN-bus communications
  • The power modules can be grouped together in parallel
  • Isolation between input and output
  • Easy to install and maintain

Note: CE Approval in progress

Separate air duct for cooling

60KW AC to DC Rectifier 

 

This ultra-efficient module has a power rating of 62.5KW and supports an output voltage range from 570 to 850 Volts.

Key Specifications:

AC Input

  • Input voltage range:  320Vac~530Vac, 3phase without neutral
  • MAX input current:  <120A
  • Frequency range: 45Hz?65Hz 45Hz?65Hz
  • Power factor:  ≥0.99
  • Efficiency (full load): >98.2%
  • THD(total harmonic distortion):  <5%

DC Output

  • Output power:  60kw
  • Output voltage range:  570~850Vdc
  • MAX Output current:  100A
  • Voltage stabilized accuracy:  <±0.5%
  • Current stabilized accuracy: ≥±1% (output power in 20%~100%)

Mechanical 

  • Dimensions – HxWxD: 125mm×360mm×490mm
  • Weight:  ≤19kg

Interfacing

  • CAN Bus

Note: CE Approval in progress

Part No.: DT60AD01M

60KW DC to DC Converter

 

This ultra-efficient module has a power rating of 60KW and supports an output voltage range from 300 to 950 Volts.

Key Specifications:

DC Input

  • Input voltage range:  560Vdc~850Vdc
  • MAX input current:  <75A
  • Efficiency (full load): >98.2%

DC Output

  • Output power:  60kw
  • Output voltage range:  300 ~950Vdc
  • MAX Output current:  90A
  • Voltage stabilized accuracy:  <±0.5
  • Current stabilized accuracy:  ≥±1% (output power in 20%~100%)

Mechanical 

  • Dimensions – HxWxD: 125mm×360mm×490mm
  • Weight:  ≤22kg

Interfacing

  • CAN Bus

Note: CE Approval in progress

Part No.: DT60DD01M