Compact, Efficient, Light-weight DC Modules
The Deltrix family of 15KW DC Charging Modules has been specifically designed for the charging of Electric Vehicles.
The units host a 3 phase AC input with a wide range of DC output voltages (from 30V to 750V DC)
The key features of the modules are:
- Very High Efficiency >95%
- Compact size
- Ultra-High Power Density
- Wide Output Voltage Range Small Output Ripple voltage ≤2V p-p
- Low Standby Power Consumption ≤10W
- Total Protection with alarm functions:
- Input over/under-voltage
- Output over-voltage
- Over-current
- Over-temperature protection
- Output under voltage alarm
- Output short circuit protection
- LED Display
- Supports CAN and RS485 bus communication
- The power modules can be grouped together with an EV Controller
- Battery current reverse protection
- Hot-swapping supported
- Discharge circuit inside
15KW, 500V Mono-Directional DC Power Supply
The model DT15AD02M has an input range of 323-437Vac, a three-phase three-wire AC input and a single, adjustable output of 200-500Vdc in addition to active power factor correction.
- Input Voltage: AC Side 323 to 437V
- Input Current: AC to DC <30A
- Input Frequency 50-60Hz
- Full Load Efficiency ≥95
- Output Current: AC to DC 0-30A
- Output Voltage: DC Side 300 to 500V
- Output ripple and noise ≤±1%Vo
Features:
- Input over/under voltage protection
- Lost phase alarm
- Output over-current protection
- Output over-voltage protection
- Output short circuit protection
- Over-temperature protection
- Alarm function
- The power supply supports N+1 redundancy
Important! Please note that this unit is currently not CE Approved and therefore not suitable for the European Market
15KW, 500V Bi-Directional DC Power Supply
The DT15AD02B is a high-frequency isolated type bi-directional power supply module. The AC side is three-phase, three-wire 304~456Vac, and the DC side is HV 200~500Vdc.
There are two operating modes:
- Charging mode when operating in the forward direction i.e. charging the battery pack or supplying DC voltage for load via AC (grid power), single output adjustable 200~500Vdc.
- Discharging mode when in reverse direction operating, converting and supplying the voltage of battery pack or DC voltage source for grid power.
Features:
- Power factor correction
- Over/under voltage protection
- Default phase alarm
- Output over-current protection
- Output short circuit protection
- Over-temperature protection and alarm function
- The power supply supports N+1 parallel operation
- Current sharing function
15KW, 750V Mono-Directional DC Power Supply
The DT15AD01M has an input range of 156~502VAC on a three-phase three-wire AC input and a single, adjustable output in the range 200VDC to 750VDC.
Features:
- Active power factor correction feature
- Input over/under voltage protection
- Lost phase alarm
- Output over-current protection
- Output over-voltage protection,
- Output short circuit protection
- The power supply supports N+1 redundancy
- Current sharing
15KW, 750V Bi-Directional DC Power Supply
The DT15AD01B is a high-frequency isolated type bi-directional power supply module. The AC side is a three-phase/three-wire 304~456VAC and the DC side is HV 200~750VDC.
There are two modes of operation:
- Charging mode when in the forward direction i.e. when charging a battery pack or supplying DC voltage for a load via AC (grid power). There is a single adjustable output with the range 200~750VDC.
- Discharging mode when operating in the reverse direction i.e. converting and supplying the voltage of battery packs or DC voltage sources to the power grid.
Features:
- Power factor correction
- Over/under voltage protection
- Default phase alarm
- Output over-current protection
- Output short circuit protection
- Over-temperature protection and alarm function
- The power supply supports N+1 parallel operation
- Current sharing function.
Important! Please note that this unit is currently not CE Approved and therefore not suitable for the European Market