Compact, Efficient, Light-weight DC Modules

 

The Deltrix family of 15KW DC Charging Modules has been specifically designed for the charging of Electric Vehicles.

The units host a 3 phase AC input with a wide range of DC output voltages (from 30V to 750V DC)

The key features of the modules are:

  • Very High Efficiency >95%
  • Compact size
  • Ultra-High Power Density
  • Wide Output Voltage Range Small Output Ripple voltage ≤2V p-p
  • Low Standby Power Consumption ≤10W
  • Total Protection with alarm functions:
    • Input over/under-voltage
    • Output over-voltage
    • Over-current
    • Over-temperature protection
    • Output under voltage alarm
    • Output short circuit protection
  • LED Display
  • Supports CAN and RS485 bus communication
  • The power modules can be grouped together with an EV Controller
  • Battery current reverse protection
  • Hot-swapping supported
  • Discharge circuit inside

15KW, 500V Mono-Directional DC Power Supply

 

The model DT15AD02M has an input range of 323-437Vac, a three-phase three-wire AC input and a single, adjustable  output of 200-500Vdc in addition to active power factor correction.

  • Input Voltage: AC Side 323 to 437V
  • Input Current: AC to DC <30A
  • Input Frequency 50-60Hz
  • Full Load Efficiency ≥95
  • Output Current: AC to DC 0-30A
  • Output Voltage: DC Side  300 to 500V
  • Output ripple and noise ≤±1%Vo

Features:

  • Input over/under voltage protection
  • Lost phase alarm
  • Output over-current protection
  • Output over-voltage protection
  • Output short circuit protection
  • Over-temperature protection
  • Alarm function
  • The power supply supports N+1 redundancy

Important! Please note that this unit is currently not CE Approved and therefore not suitable for the European Market

15KW, 500V Bi-Directional DC Power Supply

 

The DT15AD02B is a high-frequency isolated type bi-directional power supply module. The AC side is three-phase, three-wire 304~456Vac, and the DC side is HV 200~500Vdc.

There are two operating modes:

  1. Charging mode when operating in the forward direction i.e. charging the battery pack or supplying DC voltage for load via AC (grid power), single output adjustable 200~500Vdc.
  2. Discharging mode when in reverse direction operating, converting and supplying the voltage of battery pack or DC voltage source for grid power.

Features:

  • Power factor correction
  • Over/under voltage protection
  • Default phase alarm
  • Output over-current protection
  • Output short circuit protection
  • Over-temperature protection and alarm function
  • The power supply supports N+1 parallel operation
  • Current sharing function

15KW, 750V Mono-Directional DC Power Supply

 

The DT15AD01M has an input range of 156~502VAC on a three-phase three-wire AC input and a single, adjustable output in the range 200VDC to 750VDC.

Features:

  • Active power factor correction feature
  • Input over/under voltage protection
  • Lost phase alarm
  • Output over-current protection
  • Output over-voltage protection,
  • Output short circuit protection
  • The power supply supports N+1 redundancy
  • Current sharing

15KW, 750V Bi-Directional DC Power Supply

 

The DT15AD01B is a high-frequency isolated type bi-directional power supply module. The AC side is a three-phase/three-wire 304~456VAC and the DC side is HV 200~750VDC.

There are two modes of operation:

  1. Charging mode when in the forward direction i.e. when charging a battery pack or supplying DC voltage for a load via AC (grid power). There is a single adjustable output with the range 200~750VDC.
  2. Discharging mode when operating in the reverse direction i.e. converting and supplying the voltage of battery packs or DC voltage sources to the power grid.

Features:

  • Power factor correction
  • Over/under voltage protection
  • Default phase alarm
  • Output over-current protection
  • Output short circuit protection
  • Over-temperature protection and alarm function
  • The power supply supports N+1 parallel operation
  • Current sharing function.

Important! Please note that this unit is currently not CE Approved and therefore not suitable for the European Market